For duplication requires a fully functional remote control.The dubbing procedure must be performed in the vicinity of the receiver.1. Press, using a pin, the small key hidden that is in the back of the remote control functioning. If not present, the hidden button simultaneously press the top two buttons for 2/3 seconds.2. Press the functioning of the remote control button that you want to duplicate in new remote control (to be programmed).3. Within 10 seconds, press, using a pin, the small key hidden that is in the back of the new radio. If not present, the hidden button simultaneously press the top two buttons for 2/3 seconds.4. Press the new transmitter button to complete the learning.5. Wait at least 10 seconds and try to actuate the opening of the gate with the remote control just programmed.6. To copy another key start over from step 1.
remote learning1. Open the radio receiver (follow the antenna wire radio, to find the radio receiver).2. Press once on the SW1 button of the radio receiver. The LED on the radio receiver flashes.3. Press the hidden button on the new remote control, until the receiver LED remains lit.4. Press the new transmitter button until the LED flashes restart.5. Wait until the LED goes out.the 2nd key registration6. Press once on the SW2 button on the radio receiver. The LED on the radio receiver flashes.7. Press the hidden button on the new remote control, until the receiver LED remains lit.8. Press the button of the new remote control, until the LED flashes restart.9. Wait until the LED goes out.
.jpg "Anviz")
